How to Size and Cut a Carbon Filter Pad

A cut-to-fit carbon pad lets you make your own replacement filter for appliances that use a flat filter, as long as you size it correctly. Here is a simple way to get a clean fit.

What you need

Your old filter or its frame, a tape measure, a marker, and a sharp pair of scissors.

Step by step

Start by measuring the length and width of the old filter, or of the space it sits in. If you still have the old filter, lay it on the carbon pad and trace around it with the marker. Cut just inside the line so the new pad sits flat without bunching, then place it in the frame facing the same direction as the original.

Tips for a good fit

Make clean, straight cuts and avoid folding or compressing the pad, since air needs to flow through it evenly. Make sure the edges are not curled over, and check your appliance manual for the recommended size and replacement schedule. If your appliance has a tight frame, it is better to trim a little more than to force the pad in.

ID Air Systems carries cut-to-fit carbon pads and bulk rolls that are generic replacement media, compatible with many popular appliances. We are not affiliated with or endorsed by any appliance brand. Browse all of our carbon filters to find the size you need.

Back to blog